Kenncoat Acrylic primer is a water-based, acrylic binder, applied by sprinkling with silica sand, used to prevent moisture on concrete or asphalt floors and to increase the adhesion of other top layers to the surface.
Kenncoat Acrylic line paint is a 100% acrylic binder-based, water-based, UV resistant, tennis court paint.
Kenncoat Resurfacer is a water-based, acrylic binder, supported with filler and applied by mixing with silica sand, used to increase the adherence of the upper layers on concrete or asphalt floors, to close pores and to obtain a flat floor.
Kenncoat Cushion is a water-based, acrylic binder, 0.5mm-1.0mm thin layer or 1.0mm-2.0mm coarse layer prepared with two types of rubber granules, used to add flexibility to the surface.
Kenncoat Topcoat is a 100% acrylic binder-based, water-based, UV-resistant, tennis court paint.
Acrylic-based epoxy paint is a high-strength product with a bright surface, produced in two components. Especially in flooring systems, it is preferred to provide resistance and not to detach from the coating when exposed to high stresses.
It is an acrylic flooring product that is used with water, sand, cement to remove the + -5mm corrugations that occur on surfaces such as tennis court flooring, basketball court flooring, volleyball court flooring.
In acrylic flooring systems, it can be used preferably to make the floor look brighter and provide an extra UV resistance against sun fading after the entire application is completed. Since our acrylic floor paints produced in our company are produced with UV resistant resins, they do not turn yellow or fade in the sun. Therefore, the use of Extra Glosscoat is preferred.
It can be applied on PVC-based homogeneous and heterogeneous floor tiles and coatings, linoleum-type natural floor coverings, indoor leveled concrete flooring used for bonding, prefabricated concrete, cement and gypsum-based screeds.